Be smart – get the waterproofing membrane done before the tiling. erecting a great shower is a skill, and you must have the moxie in plumbing to carry out this with perfection. Shower walls bear proper plumbing, squaring, and good waterproofing for lasting use. Avoid using drywall or green showers. Rather conclude for the substrate for tiling walls. It helps in a better waterproofing result. But what’s the stylish way to waterproof the shower cube before laying the pipe? You can either do the proofing yourself using DIY fashion or hire a professional to get an expert shower wall. Then you can get the tools demanded the process and a complete step-by-step guideline.
Tools needed for the waterproofing process
- Blower
- Primer
- Block brush
- Masking tape
- Waterproof membrane
- Roller and bucket
Step-by-step process of waterproofing the shower wall – Before laying tiles
Wipe the face duly before starting the process. You can use an important cracker to remove all the dust and vacuum any lower patches to insure that they don’t disrupt the membrane.
Use a dry cloth to get relieved all the humidity from the walls and any face that requires waterproofing installation. Stuffiness shall ruin the membrane and the entire process.
Start the process by applying a thin subcaste of manual that helps seal the seams of the drywall. The manual helps prepare the walls and makes them ready for the waterproofing procedure.
Leave the manual on the face for many hours until it’s 100 dry for the ensuing process.
Apply a thin silicone blob on every corner and confluence around the face, waste pipe, gates, and sock plumbing. The silicone coating ensures the shower area turns into a leak-evidence face.
A waterproofing membrane on the walls. Take redundant care in removing any bubbles or wrinkles from the membrane.
Ensure that waterproof the face is with multiple fleeces and covers the corners of the wall. The entire waterproofing fleece should be at least to get stylish results.
Every fleece of the membrane fleece should be in a different direction that ensures complete achromatism of the result.
Eventually, add a heavy finishing fleece to complete the proofing. Leave the shower area for drying. It may take up to 24- 72 hours for complete drying.
Test the waterproofing after it’s complete. You can do this by using a thermal camera that shows leaks or seepages.
Benefits of adding waterproof membrane in the wet area
Protection from leakage
The reason is that you get complete protection from water leakage. The shower receives high pressure and a high volume of water. Hence, it’s important to have a sealant result to insure that the leaks don’t beget any slippery or wet shells that can be dangerous.
Health and Safety
A shower or restroom which lacks a waterproofing system increases the possibility of earth, humidity, and trapping of microorganisms. From a health and safety perspective, it’s dangerous to use a space that’s a parentage ground for fungi and earth.
Increase property life
When you use an excellent quality waterproof membrane for the kitchen or shower area, it automatically increases the property’s life and valuation. You get waterproofing before tiling the walls. It’s easier on the fund. still, if you plan to carry out this process after the penstocks, it’s an inviting task and precious.
Conclusion
Be smart and don’t avoid the waterproofing of shower walls to save plutocrats or time – it’s always judicious to finish the process before fixing the penstocks.
Redwop is a prime waterproofing manufacturer in India that is involved in the production of a wide array of waterproofing solutions used in numerous residential and commercial construction applications. These solutions are manufactured using state-of-the-art technology and comply with the international standards of construction