POLYCOTE NPW is supplied as two component acrylic modified waterproofing materials. Dry component consist of proper blend of cementitious materials and liquid component consist of white acrylic emulsion. The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using either brush, trowel or spray. Roller application may also be used, however finish the surface with a trowel. Properties of cured coating (21 days cure at 23°C, followed by 28 days immersion at 23°C).The values obtained are for POLYCOTE NPW when applied in two coats each of 1 mm wet film thickness.