My Cart 2
Sub total: $138.00
total: $138.00




PRIMER 25 is a two component epoxy based primer with good penetrating properties for concrete surfaces

TDS View
Category: Self Leveling Flooring


  • Primer on mineral substrates such as concrete and cementitious screed  Can be applied on pre-cleaned oil contaminated and wet matt substrates
  • Suitable for priming concrete surfaces prior to the application of any of the EPFLOOR MM2, range of resin based floor toppings, EPCOTE range of protective coatings or EPMORTAR range of epoxy repair mortars  

  • Can be applied even on damp surfaces
  • Improves the adhesion of epoxy floor toppings and mortars with the substrate.
  • Low viscosity  
  • Easy to apply  
  • Excellent penetration
  • Seals pores and capillaries  
  • Excellent bond to substrate  
  • High moisture tolerance 

 Method of application:

  • Before application of primer surface preparation is vital
  • Laitance and deposits on new concrete floors are best removed by light grit blasting, mechanical scrabbling or grinding. On smaller areas thorough etching using RECLEANER may be considered. After etching the floor, it should be thoroughly washed with clean water and then allowed to dry.
  • Mechan

Appearance Liquid brown
Mixed density 1.06 gm/cm3
Pot life @ 300C 25 minutes

Redwop Chemicals Pvt. Ltd. is famous in the market as an ISO 9001:2015 certified Company in Manufacturers, Trader and Exporters.