My Cart 2
Sub total: $138.00
total: $138.00



A ready to use waterproofing liquid. When mixed with cement, sets in 30-40 seconds to seal severe water infiltrations.

TDS View
Category: Fast Plugging


  • Rock masonry and Manholes
  • Joint filling, pointing between concrete segments in concrete and brick tunnels, sewage systems, pipes and mines
  • Stops active water or seepage under pressure through joints, cracks and holes in concrete or masonry, where a normal mortar would be washed away  
  • In construction joints
  • For instant sewer connections  

  • The use of MICROCONE 2A enables the stemming of severe water infiltration or out flow in mines, water reservoirs, manholes etc.
  • In water retaining structure damage condition it acts as emergency water stopping  
  • Excellent bond to the substrate where applied
  • It produces low exothermic heat which reduces thermal cracking Contains no chloride admixtures

Method of application:

  • Surfaces should be thoroughly cleaned, roughened and washed with fresh, clean water to remove any dirt, debris, loose, particles or contaminants. Level off any sharp surface protrusions.
  • Cracks and fissures may need to be enlarged to increase the bond. Chasing out to achieve a slight dovetail effect is ideal.
  • Place MICROCONE 2A into a rubber bowl and then

Appearance Viscous alkaline liquid
colour Light yellow
Density 1.25 Kg/lit
Chloride content Nil
Minimum working temperature Above 50c
PH value 7 to 8

Redwop Chemicals Pvt. Ltd. is famous in the market as an ISO 9001:2015 certified Company in Manufacturers, Trader and Exporters.