My Cart 2
Sub total: $138.00
total: $138.00



Polycote NPW two-component polymer modified cementitious coating is supplied in pre-packaged form. The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using either brush, trowel or spray. Roller application may also be used, however finishing the surface with a trowel is recommended for best results. Polycote NPW, available in grey and white, cures to form an elastomeric impermeable membrane.

TDS View
Category: Water Proofing Chemicals


  • Potable water retaining structures  
  • Potable water excluding structures
  • Internal basement waterproofing
  • Drainage culverts   

  • Withstands high positive and negative hydrostatic pressures  
  • Excellent crack accommodation before and after immersion  
  • Approved for use in contact with potable water  
  • Excellent bond to concrete and masonry  
  • Long working life  
  • Easy application by brush, trowel or spray  
  • Bonds to green or damp concrete 

Compliance standard:
DIN 1048
BS 476: 1987 Parts 6 and 7  

Application procedure:
All surfaces which are to receive the coating, must be free from oil, laitance, grease, wax, dirt or any other form of foreign

Colour Grey /white
Mixed density 1850 Kg/m3
Pot life @200C @350C 2 hrs. 10 min
Resistance to negative water pressure(DIN1048) 3 bar (30 m head of water)
Static crack accommodation 0.9mm

Redwop Chemicals Pvt. Ltd. is famous in the market as an ISO 9001:2015 certified Company in Manufacturers, Trader and Exporters.